There are several drawbacks to incandescent light bulbs. Incandescent light bulbs use significantly more electricity than other light emitting bulbs such as fluorescent bulbs. Depending on the cost of your electricity, average savings for using fluorescent lighting for a comparable incandescent bulbs may be $60-$75 per year assuming 4 hours of usage a day. The incandescent bulb works by heating the filament. 90% of the energy used is converted to heat. For a few months in the winter you add heat to the house and its welcome. The other 9 months of the year its unwanted heat you will air condition or attempt to vent away. Remember the child’s toy oven that baked cookies with nothing but a light bulb inside it? Also, when the incandescent bulb burns out you must wait for it to cool before you change it, or protect your fingers from being burnt. The quality of incandescent light is poor. Your eyes adapt to it, but uncorrected photographs show the yellowish orange cast given by incandescent light bulbs. Poultry farms avoid raising fowl under incandescent lights because it can cause self-destructive stress in the birds. Incandescent light bulbs have a relatively short life span. Many other light systems such as the fluorescent will last up to 13 times as long. The hazards of an incandescent bulb breaking off in the light socket. If you have light fixtures mounted high up on the ceiling like I do, and an incandescent light bulb breaks, replacing it is like a surgeon removing his own appendix. First you have to remember to turn off the socket so you don’t electrocute yourself. Then you have to put on a leather glove, or use half of a raw potato to ‘bite’ into the broken glass so you can try to twist the bulb out of its threads. All of this is done while balancing on a ladder. In conclusion, a fluorescent light bulb uses substantially less electricity, does not emit waste heat, lasts up to 13 times longer between replacement, does not emit yellowish orange light, and is very easy to replace. Given the choice, I always choose fluorescent lighting over incandescent or halogen lighting.

HHHHHHHHHHHHHHHEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLLPPPPPPPPPPPPP.

 

I have a yahoo flickr account to post pictures of Thermal Images. I opened my account today and it was in French. As I don't speak, read, or understand French I am at a loss. Does anyone know how to change the languauge preferences on yahoo flickr? repeated calls to yahoo have been of no use to me as I must file an online claim to get tech support and only get back an aoutomated response. Any help would be greatly appreciated.

 

 

Mark

Thermal Imaging and how it works.

 Thermography measures surface temperatures by using infrared video and still cameras. These tools see light that is in the heat spectrum. Images on the video or film record the temperature variations of the building's skin, ranging from white for warm regions to black for cooler areas. The resulting images help the auditor determine whether insulation is needed. They also serve as a quality control tool, to ensure that insulation has been installed correctly. A thermographic inspection is either an interior or exterior survey. The energy auditor decides which method would give the best results under certain weather conditions. Interior scans are more common, because warm air escaping from a building does not always move through the walls in a straight line. Heat loss detected in one area of the outside wall might originate at some other location on the inside of the wall. Also, it is harder to detect temperature differences on the outside surface of the building during windy weather. Because of this difficulty, interior surveys are generally more accurate because they benefit from reduced air movement. Thermography uses specially designed infrared video or still cameras to make images (called thermograms) that show surface heat variations. This technology has a number of applications. Thermograms of electrical systems can detect abnormally hot electrical connections or components. Thermograms of mechanical systems can detect the heat created by excessive friction. Energy auditors use thermography as a tool to help detect heat losses and air leakage in building envelopes. Infrared scanning allows energy auditors to check the effectiveness of insulation in a building's construction. The resulting thermograms help auditors determine whether a building needs insulation and where in the building it should go. Because wet insulation conducts heat faster than dry insulation, thermographic scans of roofs can often detect roof leaks. In addition to using thermography during an energy audit, you should have a scan done before purchasing a house; even new houses can have defects in their thermal envelopes. You may wish to include a clause in the contract requiring a thermographic scan of the house.

Preparing for a Thermographic Inspection

 To prepare for an interior thermal scan, the homeowner should take steps to ensure an accurate result. This may include moving furniture away from exterior walls and removing drapes. The most accurate thermographic images usually occur when there is a large temperature difference (at least 20°F [14°C]) between inside and outside air temperatures.

How They Work

 Thermography measures surface temperatures by using infrared video and still cameras. These tools see light that is in the heat spectrum. Images on the video or film record the temperature variations of the building's skin, ranging from white for warm regions to black for cooler areas. The resulting images help the auditor determine whether insulation is needed. They also serve as a quality control tool, to ensure that insulation has been installed correctly. A thermographic inspection is either an interior or exterior survey. The energy auditor decides which method would give the best results under certain weather conditions. Interior scans are more common, because warm air escaping from a building does not always move through the walls in a straight line. Heat loss detected in one area of the outside wall might originate at some other location on the inside of the wall. Also, it is harder to detect temperature differences on the outside surface of the building during windy weather. Because of this difficulty, interior surveys are generally more accurate because they benefit from reduced air movement. Thermography uses specially designed infrared video or still cameras to make images (called thermograms) that show surface heat variations. This technology has a number of applications. Thermograms of electrical systems can detect abnormally hot electrical connections or components. Thermograms of mechanical systems can detect the heat created by excessive friction. Energy auditors use thermography as a tool to help detect heat losses and air leakage in building envelopes. Infrared scanning allows energy auditors to check the effectiveness of insulation in a building's construction. The resulting thermograms help auditors determine whether a building needs insulation and where in the building it should go. Because wet insulation conducts heat faster than dry insulation, thermographic scans of roofs can often detect roof leaks. In addition to using thermography during an energy audit, you should have a scan done before purchasing a house; even new houses can have defects in their thermal envelopes. You may wish to include a clause in the contract requiring a thermographic scan of the house.

 Preparing for a Thermographic Inspection

 To prepare for an interior thermal scan, the homeowner should take steps to ensure an accurate result. This may include moving furniture away from exterior walls and removing drapes. The most accurate thermographic images usually occur when there is a large temperature difference (at least 20°F [14°C]) between inside and outside air temperatures.

How They Work Thermography measures surface temperatures by using infrared video and still cameras. These tools see light that is in the heat spectrum. Images on the video or film record the temperature variations of the building's skin, ranging from white for warm regions to black for cooler areas. The resulting images help the auditor determine whether insulation is needed. They also serve as a quality control tool, to ensure that insulation has been installed correctly. A thermographic inspection is either an interior or exterior survey. The energy auditor decides which method would give the best results under certain weather conditions. Interior scans are more common, because warm air escaping from a building does not always move through the walls in a straight line. Heat loss detected in one area of the outside wall might originate at some other location on the inside of the wall. Also, it is harder to detect temperature differences on the outside surface of the building during windy weather. Because of this difficulty, interior surveys are generally more accurate because they benefit from reduced air movement. Thermography uses specially designed infrared video or still cameras to make images (called thermograms) that show surface heat variations. This technology has a number of applications. Thermograms of electrical systems can detect abnormally hot electrical connections or components. Thermograms of mechanical systems can detect the heat created by excessive friction. Energy auditors use thermography as a tool to help detect heat losses and air leakage in building envelopes. Infrared scanning allows energy auditors to check the effectiveness of insulation in a building's construction. The resulting thermograms help auditors determine whether a building needs insulation and where in the building it should go. Because wet insulation conducts heat faster than dry insulation, thermographic scans of roofs can often detect roof leaks. In addition to using thermography during an energy audit, you should have a scan done before purchasing a house; even new houses can have defects in their thermal envelopes. You may wish to include a clause in the contract requiring a thermographic scan of the house. Preparing for a Thermographic Inspection To prepare for an interior thermal scan, the homeowner should take steps to ensure an accurate result. This may include moving furniture away from exterior walls and removing drapes. The most accurate thermographic images usually occur when there is a large temperature difference (at least 20°F [14°C]) between inside and outside air temperatures.

Just passing this along, Snopes says it's legitimate.




With Christmas fast approaching . . . . . . . . . . .watch out for this... be alert..



Please read the following. It applies to FedEx as well, Thanks.
============ ========= ========= ========= =========
The newest virus circulating is the UPS Delivery Failure. You will receive an email from UPS Packet Service along with a packet number. NOTE: The word packet is mis-spelled on this line. It will say that they were un-able to deliver a package sent to you on such and such a date. It then asks you to print out the invoice copy attached. DON'T TRY TO PRINT THIS. IT LAUNCHES THE VIRUS!

Pass this warning on to all your PC operators at work and home. This virus has caused Millions of dollars in damage in the past few days.


Snopes confirms that it is real:
http://www.snopes. com/computer/ virus/ups. asp

Please join me in congratulating Sheri Sanderson being selected the Powdersville Prudential residential Real Estate sales person of the month. I have known Sheri for some time now and have found her to be professional, upbeat, and an good person. What more could you ask for? A big shout out to Sheri for a job well done and also for being the person she is. It is a privilege to know her.

Just thought that I would post this for all to read. I found it very interesting and believe it is a classic case of where the Home Inspection and Commercial Building inspection industry is headed. As we move forward with technology the consumer will become more and more aware of things like this and will require/request that this be made available to them as protection just as Termite inspections have become the norm as well as home inspections and also Radon testing. I believe this is the beginning of the future. Please read below. It is not my information but I felt I had to share it.

 

The U.S. Department Of Energy Now Recommends That A Thermographic Scan Be Done Before Purchasing A House, Even On New Homes

Thermography uses specially designed infrared video or still cameras to make images (called thermograms) that show surface heat variations. This technology has a number of applications. Thermograms of electricalsystems can detect abnormally hot electrical connections or components. Thermograms of mechanical systems can detect the heat created by excessive friction. Energy auditors use thermography as a tool to help detect heat losses and air leakage in building envelopes.

Infrared scanning allows energy auditors to check the effectiveness of insulationin a building's construction. The resulting thermograms help auditors determine whether a building needs insulation and where in the building it should go. Because wet insulationconducts heat faster than dry insulation, thermographic scans of roofs can often detect roof leaks.

In addition to using thermography during an energy audit, you should have a scan done before purchasing a house; even new houses can have defects in their thermal envelopes. You may wish to include a clause in the contract requiring a thermographic scan of the house. A thermographic scan performed by a certified technician is usually accurate enough to use as documentation in court proceedings.

Well I have my camera and have begun Thermal Inspections. It is a new world in the inspection industry and I am glad I am at the forefront of this part of it. I am amazed almost every day of the things I missed without this camera. Not that I would have been able to see the things I am now finding but it still amazes me what direction this industry is about to take. I believe that in 5 to 7 years most inspectors will need to have a thermal camera or fall by the wayside. AS buyers become more savvy and understand the benefits of this type of inspection they are more and more open to it. I have recently inspectedseveral houses all new construction and when the client has seen what this technology can do they have actually booked a follow up inspection for their 12 month warranty walk through and also have sent my name to friends they know who purchased homes within the last few months that have their 12 month warranty walk through comimg up.

 

If you are interested in seeing the difference please feel free to visit my new website and watch the video on the front page.

I think you will be surprised.

 

Warmest Regards to all

Mark Reusch

A Major Inspection Service & Consulting

V.P. Upstate National Association of Home Inspectors

 

www.amisc.net

Well I have my camera and have begun Thermal Inspections. It is a new world in the inspection industry and I am glad I am at the forefront of this part of it. I am amazed almost every day of the things I missed without this camera. Not that I would have been able to see the things I am now finding but it still amazes me what direction this industry is about to take. I believe that in 5 to 7 years most inspectors will need to have a thermal camera or fall by the wayside. AS buyers become more savvy and understand the benefits of this type of inspection they are more and more open to it. I have recently inspectedseveral houses all new construction and when the client has seen what this technology can do they have actually booked a follow up inspection for their 12 month warranty walk through and also have sent my name to friends they know who purchased homes within the last few months that have their 12 month warranty walk through comimg up.

 

If you are interested in seeing the difference please feel free to visit my new website and watch the video on the front page.

I think you will be surprised.

 

Warmest Regards to all

Mark Reusch

A Major Inspection Service & Consulting

V.P. Upstate National Association of Home Inspectors

 

www.amisc.net