A refrigerator is the most essential appliance in houses, store, restaurants, hotels, and almost everywhere else. It helps store the food items for later use. So, when a refrigerator stops working, you might have to face a lot of trouble. It is better if you know how to fix a refrigerator properly after analysing the common problems it faces.
Here are five tips mentioned to help you fix a refrigerator.
Tools
First of all, you should have the right tools that can help you fix a refrigerator. The most common problems of a refrigerator include leaking, loud noise, shaking, and dispenser not working. However, if you have tools to deal with such problems, you can easily fix your refrigerator. The tools required to do the repairing job are a screwdriver, hairdryer, adjustable wrench, long brush, level, vacuum, nut driver, wire stripper, and socket. You can get them from any nearby hardware store in San Marcos, CA.
Fridge Parts
If you want to fix your refrigerator without any external help, you should have access to the new parts to replace old ones. You must have the model number stamped on the tag of the fridge or written on the manual. You can also search on the internet and a lot of relevant online services will pop up that can deliver you the required parts at your door.
Electrical or Power Supply
Most of the problems of the refrigerator happen when it doesn’t have adequate power supply. First of all, make sure that the refrigerator is not unplugged. You can see if the refrigerator is working by the light that switches on when you open the door. If you don’t provide the refrigerator with the power supply for longer, the foot items might start stinking.
Replace Evaporator’s Fan
If the temperature inside the fridge is not cool enough and you can hear the compressor running, the problem is something else. It usually happens when the evaporator’s fan of your refrigerator is broken or stuck. The other visible sign you can notice is the louder noise of the door.
You can fix this issue by replacing the evaporator’s fan easily by following a few steps. Remove the cover to access the evaporator’s fan and unscrew the plastic plugs. Now you can see the fan is spinning or not to replace the motor. Don’t forget to unplug your refrigerator before removing the fan. Detach the wires from the old fan and attach them with the new one. If you doubt your skills, you can hire any renowned Refrigerator Repair San Marcos, CA service.
Temperature Settings
You can also fix a lot of issues by learning to adjust the temperature settings. The refrigerator may have been adjusted to a lower or higher temperature accidentally. You can find the thermostat inside the refrigerator and adjust the temperature level according to the current weather’s requirement. You can also take help from a manual given by the manufacturer to see where the thermostat is located.
Comments(0)