Name

Mold Inspection and Testing Company

Company

Mold Detection Services of South Florida

E-mail

Contact Mold Inspection and Testing Company (Mold Detection Services of South Florida)

Website

http://www.molddetectionservices.net

Office Phone

(305) 571-2280

Alt. Phone

(866) 654-6653

Fax

(305) 571-2285

Address

Coconut Grove, FL, 33133

Description

Certified Mold Inspection and Testing Services. Mold Detection Services of South Florida can provide consulting services to help you though all your mold problems. Call the top mold company in Miami.

About Us:

Mold Detection Services, Inc. of South Florida, will test or sample for mold in homes, apartments, workplaces, commercial properties, boats, and anywhere else mold grows. Indoor Air Quality, Bulk, Swab, Bio Tape and Environmental Sample results are generated with in 24 - 48 hours. 

A certified Indoor Environmentalist, utilizing the best equipment available in the industry (Infrared Cameras, Laser Particle Counters, Etc.), will carry out every inspection. We use only digital calibrated, custom made indoor air quality testing pumps to insure you receive only accurate results. Consequently, our clients will receive the highest quality service.

Our inspection services include a thorough inspection (utilizing Infared Thermal Imaging, Laser Particle Counts, Visual Observations) and follow-up testing (air samples, bulk, swabs and glass slides), accompanied by an extensive report. In addition, we will be working with a nationally accredited laboratory, dedicated to the production of accurate data, via high-quality equipment, and staffed with professionals specialized in this field.

We will not be involved in the remediation of any mold problems, since this would be a CONFLICT OF INTEREST. We do offer Mold Consulting Services to help you through the remediation process and to protect your interests. We offer Post Remediation Inspection and Testing to confirm the job has been done correctly.

Mold Detection Services will protect your interest. The South Florida Mold Company You Can Trust!

305-571-2280 or 866-654-MOLD(6653)
       

(Pictured Above) Laser Particle Counter, Buck Air Pump, Calibration Pump, Zefon Bio-Pump

Air Sampling - Indoor Air Quality Testing: 

Indoor Air Samples are usually performed in order to test for nonviable (dead) mold spores. Testing for nonviable mold is done by microscopic examination of the sample to identify fungal and non-fungal particles that may be allergenic to individuals. Other particles such as: fiberglass, insect fragments, rusts, dirts, and more are also detected during non-viable testing. This is the quickest way to test for airborne mold spores and other harmful particles.

Testing for viable (living) mold is done by placing the sample onto agar culture medium that supports the growth of the organism(s) in question and allows identification of the species and level of contamination. This takes more time and is more costly.

When colonization occurs one mold has overtaken your entire home. Colonization is the formation of compact population groups of the same type of mold species.

· Bulk Sampling Bulk samples include, but are not limited to, chunks of carpet, insulation, and wallboards. Bulk samples are collected from visibly moldy surfaces by scraping or cutting materials with a clean tool and placing the sample into a petri dish for testing.

 

· Surface Sampling Surface samples are collected by wiping a measured area with a sterile swab or by lifting a sample with bio tape. The surface sample is cultured and then placed into a petri dish. Surface samples are collected by wiping a measured area with a sterile swab or by lifting a sample with bio tape. The surface sample is cultured and then placed into a petri dish. The petri dish is inspected by a lab technician under a microscope so that the fungi can be removed and identified by species.

BACTERIAL TESTING SERVICES ARE ALSO AVAILABLE UPON REQUEST

Same Day Test Results Available - Standard Service is 24 - 48 hours

Certified Mold Testing, Inspection, Detection and Consulting

Clearance Testing & Post Remediation Inspections

Boca Raton Mold Testing & Consulting

Indoor Air Quality and Environmental Tests

Mold Detection Services, Inc.

Florida Mold Testing Companies

Miami Dade Mold Testing Services

We are certified mold remediation consultants that will monitor the remediation process from start to finish. We start with a full inspection to pinpoint all of the problem areas, monitor the remediation process and then perform post remediation clearance inspection and testing.

· Certified Visual Inspections                                   • Infrared Thermal Imaging Camera Scans 

· Protimeter Readings For Moisture                         • ARTI Laser Particle Readings 

· Fiber Optic Boroscope Exams                                • Hygrometer Readings- Temp & Humidity

· Certified Mold Dog Alerts                                       • Digital Photographs Detailing Problems

                      

(Pictured Above) Infrared Thermal Camera, Laser Hygrometer and Boroscope (Fiber Optics)

We offer Post Remediation Testing and Clearance Samples. Before you pay your remediation company and release them from the job, make sure you have us perform a proper post remediation inspection and testing. We have NO ethical conflicts of Interest. Let us protect you! We will make sure your Indoor Air Quality and Environment is healthy.

Areas of Expertise

Infections

Infections can be caused by molds found in indoor air. At extreme levels, hypersensitive pneumonitis may develop. Individuals with compromised immune systems or aggravated health conditions can be especially susceptible to invasive mold infections. Mold blamed for breathing problems

Inflammation Associated with VOC's (volatile organic compounds)

Toxin-induced inflammation is caused by repeated or high levels of exposure to airborne Mycotoxins. These Mycotoxins irritate the mucous membranes associated with the eyes, nose, and throat. If spores are inhaled and reach the lung alveoli, they may induce inflammatory reactions and cause toxic pneumonitis. The musty odor associated with airborne molds may cause headaches, dizziness, dermatitis, diarrhea, and impaired immune function.

Allergic Reactions

Allergic reactions may be the most common health problem of mold exposure. Typical symptoms reported (alone or in combination) include:

· Respiratory problems, such as wheezing, and difficulty in breathing

· Nasal and sinus congestion

· Eyes-burning, watery, reddened, blurry vision, light sensitivity

· Dry, hacking cough

· Sore throat

· Nose and throat irritation

· Shortness of breath

· Skin irritation

· Central nervous system problems

· Constant headaches

· Memory problems

· Mood changes

· Aches and pains

· Possible fever

Indoor Air Quality Testings & Mold Sampling

TESTING METHODS

Bulk/Surface Sampling. A certified inspector, trained in appropriate sampling methodology, performs bulk or surface sampling. Bulk/Surface sampling should be performed if the building inhabitants are suffering from health problems, which are or may be associated with fungal exposure. Bulk/Surface sampling should also be performed to identify the presence or absence of mold if a visual inspection is equivocal (e.g. discoloration, and staining). Bulk samples are collected from visibly moldy surfaces by scraping or cutting materials with a clean tool into a clean plastic bag. Surface samples are collected by wiping a measured area with a sterile swab or by stripping the suspect surface with "Bio Tape lift".

Carpet cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. Carpet testing will give you historical data off previous mold contamination Cassettes use a 1" piece of tubing with a 45 degree bevel fitted to the inlet port, and come preloaded with .45µ & 5.0µ MCE filter and support pad. Cassettes use a 3-piece styrene housing and helps prevent overloading.

Bio-Tape provides a simple, standardized method to sample for common bioaerosols such as mold and fungi. It consists of a flexible plastic microscope slide with a pre-defined 1" x 1" adhesive area. Each slide is provided with a unique serial number for traceability. Air Monitoring. A certified inspector, trained in appropriate sampling methodology, performs air monitoring. Air samples can be collected in various ways.

Anderson Style Bioaerosol Sampler imparts viable spores on petri dishes placed in the apparatus at a rate of 28.3 cubic liters of air per minute. Results are provided in colony forming units per cubic meter of air.

Air-O-Cell Cassettes are used for the rapid collection and analysis of a wide range of airborne aerosols including mold spores, pollen, insect parts, fibers, fiberglass, and skin fragments. This sampling device is useful in providing rapid analysis of airborne contaminants. Test is performed at 15 liters per minute.

The Zefon 5 Cell is capable of both personal and conventional air sampling. The Z 5 is proven to have an exceptionally uniform collection trace and is virtually 100% accurate for the entire fungal spore range. (d50 is less than 1 micron!) The Z 5 truly represents the next generation. Test is performed at 5 liters per minute. This cassette collects a wide range of airborne aerosols including mold spores, pollen, insect fragments, fibers, fiber glass and skin fragments.

A Laser Particle Counter is used to assess indoor air quality and cleanliness of rooms. The handheld device monitors environments to test for airborne particles. This device will help track down particle source problems. Its intelligent design and overall utility is invaluable in mold detection and making workplace environments safer and healthier.

The purpose of such air monitoring is to assess the extent of contamination throughout the building. Sampling should be conducted while ventilation systems are operating. Air monitoring should be performed if the presence of mold is suspected in a particular area of the structure (e.g. a microbial volatile odor is detected) but cannot be identified through a visual inspection. The purpose of such air monitoring is to determine the location and/or extent of mold contamination. Air monitoring should also be performed if the building inhabitants are suffering from health problems, which are or may be associated with fungal exposure. If air monitoring should also be performed, for comparative purposes, outdoor air samples should be collected concurrently at an air intake, if possible, and at a location representative of outdoor air. The outdoor control air test is very helpful in evaluating whether there is an internally generated mold problem. Such a problem may exist if indoor mold tests report mold levels that are either (a) higher than the outdoor control air test or (b) present indoors but absent from the outdoor control air test.

CALL:   (305) 571-2280     or     (866) 654-MOLD(6653)

Mold Testing Services by Mold Detection Services of South Florida - Insured & Certified