With the holiday season now in full swing, you are undoubtedly busy ... whether it's shopping for gifts, preparing for guests or gathering with friends. What you probably won't notice through the hustle and bustle of the season is your heating bills rise. Did you know that as much as half of the energy used in your home goes to heating and cooling?
As a member of the Top 5 in Real Estate Network®, I can offer you some vital information that will help you make smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system...all of which can have a big effect on your utility bills -- and your peace of mind.
Here are some tips from ENERGY STAR to help you increase the efficiency of your heating and cooling system:
Change your air filter regularly
Check your filter every month, especially during heavy-use months (winter and summer). If the filter looks dirty after a month, change it. At a minimum, change the filter every three months. A dirty filter will slow down air flow and make the system work harder to keep you warm or cool -- wasting energy. A clean filter will also prevent dust and dirt from building up in the system -- leading to expensive maintenance and/or early system failure.
Tune up your HVAC equipment yearly
Just as a tune-up for your car can improve your gas mileage, a yearly tune-up of your heating and cooling system can improve efficiency and comfort.
Install a programmable thermostat
A programmable thermostat is ideal for people who are away from home during set periods of time throughout the week. Through proper use of pre-programmed settings, a programmable thermostat can save you about $180 every year in energy costs.
Seal your heating and cooling ducts
Ducts that move air to and from a forced air furnace, central air conditioner or heat pump are often big energy wasters. Sealing and insulating ducts can improve the efficiency of your heating and cooling system by as much as 20% -- and sometimes much more.
Focus first on sealing ducts that run through the attic, crawlspace, unheated basement or garage. Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts. After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in the summer or cold in the winter. Next, look to seal any other ducts that you can access in the heated or cooled part of the house.
Consider installing ENERGY STAR-qualified heating and cooling equipment
If your HVAC equipment is more than 10 years old or not keeping your house comfortable, have it evaluated by a professional HVAC contractor. If it is not performing efficiently or needs upgrading, consider replacing it with a unit that has earned the ENERGY STAR.
Depending on where you live, replacing your old heating and cooling equipment with ENERGY STAR-qualified equipment can cut your annual energy bill by nearly $200. But before you invest in a new HVAC system, make sure that you have addressed the big air leaks in your house and the duct system. Sometimes, these are the real sources of problems rather than your HVAC equipment.
Ask about proper installation of your new equipment
Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30% -- costing you more on your utility bills and possibly shortening the equipment's life.
Taking a few small steps can be all you need to save some energy and a bit of money. If you are interested in more helpful tips, such as these, please e-mail me. Also, please feel free to forward this information along to anyone you believe might be interested as well.
Sincerely,
Peggy Hill
Peggy Hill & Associates Realty Inc., Brokerage
Office: 705-739-4455
Mobile: 705-796-8191
Peggy@PeggyHill.com
http://peggyhill.com
Comments(2)