According to a statement released by the American College of Occupational and Environmental Medicine, " Mold spores are present in all indoor environments and cannot be eliminated from them."
Mold above a window
Home inspections can indicate the presence of mold. Whenever mold starts to grow indoors there is a souce of water or moisture that is present that needs to be controlled. If normalization of the indoor environment can succeed, than the souce of water or dampness must first be identified before corrective procedures can be put in place.
Mold can be very commonly found in many homes and buildings. If basements are not properly dehumidified in the summer months, mold will develop easily; even during the colder winter months mold can develop on inorganic surfaces if moisture or dampness is present, ie, for example as evidenced on metal basement exit doors. Dampness has an easily recognized order. Signs of mold can usually be found along basement trim moldings, wall paneling, and in basement crawk areas where dampness is present due to inadequate ventilation and/or water penetration.
Mold growth in and around one's home should not go unchecked as the next level is for rot to develop leading to unsightly staining and physical deterioration of organic building materials such as wood trim. Mold is also likely to produce allergic symtoms to senisitive people.
Another issue that has emerged in the past 10 to 15 years is the presents of mold and deterioration of building materials with an exterior wall cavity. Usually the exterior cladding found at fault is called (EIFS), also called exterior insulative finish system. Even a small defect in the wall system could allow water to penetrate into the exterior wall and soon cause severe problems. A normal home inspection is limited to visual details and a specialist may have to be called in to do additional testing for moisture.
One more thing. If you are in charge of maintaining a vacant house in the winter months, as we sometimes do here in New Jersey, try to keep the indoor temperature up to 55 degrees. At this temperature mold should be held in check. If the temperature is kept at a lower level then what is recommended/ or the house has been winterized with no heat on at all, mold can develope within the interior walls of the house.




Comments(0)