Your Electrical Service Panel (Orlando, Kissimmee & Oviedo)


For more information relative to Home and Mold Inspections in, Orlando, Kissimmee & Oviedo, Florida visit HOME INSPECTOR USA.

Many homeowners who are unfamiliar with construction and wiring are timid when it comes to electrical work. It makes perfect sense to have a healthy respect for electricity—it can be dangerous if you don't understand it.

To give you confidence and a little knowledge to help you discuss electrical problems with an electrician, let’s explore how the service panel (or panel box) controls your home's electrical system.


The Service Panel

After passing through the electric meter, the local electrical utility provides electricity to your house through the service panel (also called the distribution center). The panel, which is usually located in a garage, basement or utility room, distributes electricity through individual circuits that run throughout your house.

The service panel in most homes contains circuit breakers, which look like little switches. Older homes may contain fuses, but they serve the same purpose as circuit breakers—to stop the flow of electricity when there is a problem.

As a homeowner, you need access to the panel for three tasks:

  • to shut off power to the whole house if needed (you do this by switching off the large breaker);
  • to reset a circuit breaker that trips; and
  • to turn off power to individual circuits when you are doing electrical work somewhere in the house.

You can also add new circuits to the panel box if there is room, but this is usually a job for a licensed electrician.

Why Do Circuit Breakers Trip?

If you plug too many appliances into a circuit, the system senses that they require more power than the circuit can accommodate and the circuit breaker trips, shutting off power completely. It’s a safety measure designed to protect the wiring in the circuit, as too great a demand can cause the wires to overheat.

Each circuit has a limit of how much power it can handle. You will find that limit printed on each breaker. The number represents the ampere, or amps, which measure the rate or quantity of electrical flow. The number printed on the main breaker is the upper limit your house’s service can accommodate.

For example, a 15-amp circuit is a light-duty circuit that may power something like living room and bedroom lights and electrical outlets, and there are usually several outlets on one circuit.  A 30- or 50-amp circuit is for appliances that use a lot of energy, such as an electric clothes dryer or an electric range. These kinds of appliances are usually the only thing hooked up to the circuit—called a dedicated circuit—and their wiring will have a larger diameter.


For more information relative to Home Inspections and Mold Inspections in Kissimmee, Oviedo and  Orlando Florida visit HOME INSPECTOR USA. We are licensed Home Inspector and licensed Mold Assessor in Orlando, Kissimme & Oviedo, Florida. Home Inpector USA services the following comunities: Avalon Park, Waterford Lakes, Eastwood, Alafaya Trails, Wedgefield, Oviedo, Lake Nona, Winter Park and Stoneybrook among other comunities close by in the Orlando, Kissimmee and Oviedo area. The principal John M.Acaron (Master Home Inspector) is fully bi-lingual (Spanish & English).

Posted by


This entry hasn't been re-blogged:

Re-Blogged By Re-Blogged At
Home Buying
orlando home inspection
orlando home inspector
oviedo home inspector
waterford lakes home inspector
avalon park home inspection
wedgefield home inspector
kissimmee home inspector

Post a Comment
Spam prevention
Spam prevention
Post a Comment
Spam prevention

What's the reason you're reporting this blog entry?

Are you sure you want to report this blog entry as spam?


John M. Acaron, CMI, MRSA

Master Mold Inspector & Chief Mold Assessor
Home Inspections & Mold Inspections
Spam prevention

Additional Information