A carpet cleaner, carpet shampooer or carpet extractor can help in extracting the stains and dirt deeply embedded in the carpets. The information provided in this article will help you learn exactly how does professional carpet cleaning work. Below is the process when it comes to having your carpet cleaned professionally:
- The carpets are pretreated by spraying a carpet cleaning solution and allowing it to dwell or stay there at least for 15 minutes.
- Then the carpet cleaner is used by the operators to extract soapy and dirty fluid from the carpet with the help of a high power vacuum after pumping water into it.
- Some of the carpet cleaners can heat the water to rinse the carpet whereas some cannot.
How Does Professional Carpet Cleaning Work - The Parts Involved
The configurations of the carpet cleaners can allow the users to use a large wand to clean a carpet. While cleaning a larger area of the carpet you can use ‘Walk Behind’ carpet cleaners to clean them more efficiently. The optional attachment provided with the carpet cleaners allows the user to clean soft surfaces like curtains and upholstery along with carpets.
Main Parts of Carpet Cleaners
It injects water with pressure, ranging from 60 psi or pounds per square inch to 500 psi, into the carpet.
It extracts the cleaning solution and dirty water from the carpet with the help of a motor driving it. It is available in different configurations to choose as per your requirement. The power of the motor used in the vacuum depends upon the amount of water it can lift and CFM of the airflow. The range of airflow of an ideal vacuum should be between 100 and 200 CFM, and suction power should be between 100 and 259 inches.
They hold 4.5 to 17 gallons of water to rinse the carpet.
They hold 4.5 to 15 gallons of water, dirt and cleaning chemicals extracted from the carpet.
It heats the water to rinse the carpet up to the 210 degrees F within a few minutes with the help of its powerful heating elements.
Normally, carpet cleaners come with a floor wand ranging from 10 inches to 12 inches along with one or two jets for extracting and dispensing fluids. Some models also have wands to clean stairs and upholstery. Hoses used for dispensing cleaning solution and vacuuming in different lengths are also available with certain models of carpet cleaners.
Tips to use a Carpet Cleaner
- The carpet should be vacuumed and the cleaning solution should be applied thoroughly before using a carpet cleaner. It will allow the oils and grease in the carpet to dissolve and more dirt can be extracted while cleaning it finally.
- On heavily soiled and stained synthetic carpets heated water should be used with cleaning chemical to remove stains caused by coffee, ketchup, pet urine, ink, and wine.
- Heated water should never be used on natural fibers such as wool as high temperature can damage them or shrink them.
After learning how does professional carpet cleaning work, you can use them more efficiently to clean various types of carpets. Having your carpet deep cleaned will help prevent dirt and debris from building up in the carpet fibers. It’ll also improve the air quality in your home as allergens will not collect in your carpet as well.