Most Common Appliance Problems and Solutions

By
Real Estate Agent with Velva Dunn

A malfunctioning appliance is a huge inconvenience. It always seems to happen when you least need or expect it. A device you’ve bought to make your life less complicated suddenly becomes a source of extreme frustration.

 

Fortunately, not all appliances that stop working need the intervention of a repair specialist. Some can be fixed at home by even the most inexperienced appliance owner. You should always investigate the problem before you start shelling out money that you could otherwise save.

 

Here are some typical problems you might encounter with your household appliances and what you should check before you call the repair service.

 

1. A broken refrigerator

 

Some parts of an appliance have a limited lifespan. It’s inevitable that during your years of ownership, some parts will wear out and need to be replaced. The problem with a broken refrigerator is that you need to resolve the issue speedily. If you don’t, you’ll have a load of spoiled food that you’ll wind up throwing away.

 

The first thing you should do is avoid opening and closing the door too many times. Each time you do, you allow cold air to escape from the unit. Second, you need to establish what’s wrong with your refrigerator.

 

The most common reason that a refrigerator would stop cooling its contents is a damaged or perished gasket. The gasket acts as a seal around the doors of the unit. Check the coils under the refrigerator. If they’re dirty, the fridge might not work properly. Use a vacuum cleaner with a long pipe extension to clean them.

 

2. Malfunctioning oven

 

An oven can be expensive to repair. In some cases, you’re better off reaching out to your personal money network to replace your oven. However, there are some problems you might have with your oven that are easy to handle.

 

One of the most common causes of an oven that won’t heat at all or heats unevenly is the element. The heating element usually changes color to orange when it is heated. If the entire element doesn’t change color, there’s a chance something is wrong with it. Another indicator of a problem is blistering on the element.

 

When it comes to gas issues, it’s best to call in a repair specialist. A gas buildup can lead to an explosion and cause a lot of damage.

 

3. Washing machine woes

 

There is any number of things that can go wrong with a washing machine. The inlet and outlet pipes might perish and develop holes, leaving you with a leaking machine. The gasket or seal around the door or lid can also cause a problem. These are parts that are relatively easy to replace.

 

However, your washer is a complex machine that contains sensors and other electronic functions. When a sensor doesn’t work, the machine could overflow because it can’t detect that it’s full.

 

A repair expert can replace the electronic control board or some of the electric wire. This should resolve your problem right away.

 

4. A dryer drama

 

Another essential and convenient appliance that owners would prefer not to malfunction is their dryer. As a rule, the dryer is a dependable workhorse, often running for hours at a time.

 

If the tumble dryer’s drum stops turning, you’ve got a problem. If it still turns when you spin it by hand, the problem is the drive belt. This belt keeps the drum turning while the machine is in operation.

 

Like any other motor, a tumble dryer’s motor needs bearings to operate. When the bearings are faulty or worn out, the dryer starts making a noise. If you’re not an expert, get a repair expert to replace them.

 

close

This entry hasn't been re-blogged:

Re-Blogged By Re-Blogged At
Topic:
Home Improvement

Spam prevention

What's the reason you're reporting this blog entry?

Are you sure you want to report this blog entry as spam?

Rainmaker
15,619

Velva Dunn

residential sales,new homes and relocation
Ask me a question
*
*
*
*
Spam prevention