People are using various tile laying techniques for a long time to create a picture on the surface of a wall or floor, depending on its color, size and other parameters. Parallel laying (also called basic) of ceramic tiles is ordinary and simple in terms of performing work. Much more complicated and costly is its way of laying out in a diagonal direction. But the result is worth it because the lined surface has an unusual mosaic look that combines with any interior and looks attractive in rooms of different sizes.
If the tile is the same size, its laying can be done even by inexperienced craftsmen. The quality and speed of work, of course, depend on the experience with such material, but laying in a modular way is a set of elements having different sizes and dimensions, as well as shapes that are multiples of each other. Such tiles Canberra are laid randomly or in a certain sequence. Such a performance is laborious and requires experience.
Diagonal tile planning
Tile is a finishing material, which makes it possible to use an unlimited number of design solutions, given the variety presented on the consumer market. Tiles differ in shape, color, size, complementary elements, materials, coating. All this makes it possible to make a masterpiece even from the simplest and most outstanding tile, to lay a unique, individual coating.
Advice! You can carry out styling, resorting to several methods; This can be a direct or diagonal method (it is also called a rhombus).
To lay the coating in a diagonal direction, you need to rotate an ordinary pattern by 45 °. Professionals can do almost any kind of design in a diagonal direction, turning it at an angle from 30 ° to 70 °, and there is also the practice of combining two methods - straight and diagonal laying.
Most Popular Tile Laying Options
In the store at the stage of purchasing tile material, you need to decide in advance on the scheme by which you will lay the coating; This is a very important point, on which several characteristics depend:
Equipment is a quantitative measurement of tile material, as well as the presence of other auxiliary elements. If you lay monophonic products diagonally, the coating will look calm, but if you resort to a combination of two or more colors, the picture will change dramatically.
On a note! The coating of two colors turns out to be bright and organic, but it is worth using the dominant color carefully so as not to overload the space. A large number of colors used requires even more caution and miscalculations.
At the stage of preparation for work, it is worthwhile to devote sufficient assembly time, as well as carry out calculations.
Calculation of tile consumption for cladding
When applying diagonal styling, you will need a considerable amount of cladding. Almost all the elements stacked around the perimeter of the area will get trimmed, but you will need almost all of them for work.
Advice! In this regard, we advise you to purchase material for facing with a margin of 25% - this will be waste. In this case, it is better to purchase material with a margin immediately because it will then be difficult to find the same shade of material that you will not miss.
The simplest and right way to determine the amount of material that you need for styling is a drawing. You can do it yourself by hand, or use the help of a special consultant who will help determine the amount of material and calculations.
Before buying a tile, you need to calculate its required amount
Important! Almost every manufacturer provides sellers of their products with a special program that allows you to calculate the amount of material. It is convenient and time-saving.
When laying the facing diagonally, you will need a set of tools:
Directly the coating for the cladding and the necessary shaped elements to it;
Polymer or cement glue;
Soil - it will be needed when updating the base;
Basic Tile Tools
Polymer or cement grout for joints;
The ruler made of steel, square with a tape measure;
Tile cutting machine. A tile cutter will be needed quite often since with this method of laying, and you will need to trim a large amount of material. You can rent a tile cutter for rent. It is better to use good quality equipment; This will save you time and increase the productivity of your work
Tile Cutting Methods
Cord for marking the area of coverage, as well as a marker;
To knead the solution, prepare the mixer together with the solution container;
Spatula with a mallet for carrying out the procedure for mashing seams;
To align the plates, prepare special distance crosses;
Knee pads and mounting gloves;
A cloth, bucket and sponge are needed to keep the workplace clean.
Instructions for self-laying tiles diagonally
Preparation of the base for laying tiles. The surface should allow laying tiles from 2 to 15 mm; if the coating is mosaic, the base will be 20 mm. The coating should be dry, clean, even, durable.
Checking the concrete base for evenness
Surface marking, as well as dry laying. The most important thing at this stage is the correct construction of the centerlines. When connecting the midpoints of the opposite sides, you will be able to get the longitudinal and transverse axes.
Glue preparation. One should always lay tile material out on a homogeneous solution, which has a small yield coefficient. Instructions for preparing the solution are on each package. For cooking, use an industrial mixer with a prepared container.
Always dilute the dry mixture with water in the proportion recommended by the manufacturer.
The finished glue should be perfectly homogeneous and sufficiently fluid
Laying tiles. You should start from the reference point: it is the center of the room or the far corner. Use a rag for cleaning excess glue and use the crosses to determine the distance between the tiles, and they will not allow you to place the tile too close. Also, to check the correctness of the thickness of the adhesive and the evenness of the surface, you should constantly use the level.
Surface cleaning and grouting. The gaps between the tiles should get repaired with a special grout. After fifteen minutes, it is necessary to collect the remaining grouting material and wash the surface for treatment.
After completing all work, it is necessary to clean the surface of dust and glue residue
The next day, you need to remove the remaining cement and leave the surface to dry for another two days. After five days, it is ready for operation.
These tips will help you easily install your tiles diagonally. In the end, smooth the silicone with the thumb soaked in detergent and tear off masking tape by tilting it back and away from the seam. Pay attention to the recommendations of the material manufacturer.