HOUSE Doctor (Mold Assessor): MOLD INSPECTIONS

By
Home Inspector with INDOOR MICROBIAL SPECIALIST HI-80 & MRSA1895

HOUSE Doctor (Mold Assessor)

Think about a Mold Assessor as a Medical Physician. A Medical Doctor physical examination goal is to be able to determine is you are healthy or not. Do you need either treatment or you require specialized medical attention such as surgery among others from a specialized Doctor? We at INDOOR MICROBIAL SPECIALIST perform pretty much a similar role when performing a Mold Assessment on a house, Condo, Medical facilities or any commercial building.

Our Mold Assessment and Indoor Evaluation will specifically address the environmental issues identified inside the living space related to moisture intrusion, levels of airborne mold spores, musty odors and fungal growth. Our Chief State License Mold Assessor Mr. John M. Acaron is the principal and Operations Director of INDOOR MICROBIAL SPECIALIST responsible for conducting the Mold investigations. Mr. Acaron staff has degrees in Engineering, Chemistry with minors in Biology as well state licensed Mold Assessors and Home Inspectors with vast experiences in residential design and construction.

It all begins with an interview with our clients following with our facts finding approach conducting a Mold screening and inspection inside the property inside living space. Instruments such as Moisture meters, Moisture detectors, Infrared Cameras, High power lumens flashlights are normally use to for the investigation. A series of samples may be conducted such as Indoor Air Quality sampling, Bi-O-Tape Lift sampling, SWAB sampling, Bulk sampling, Cavity sampling, Dust sampling and Laboratory testing. The number of IAQ samples are dependent on the size and configuration of the building and other living area under the HVAC system. An average number of IAQ air samples ranges from 5 to 8 on an average home or office. It is important to have enough data point to be able to professionally ascertain what is going on inside the living space. Taken less than required number of samples can jeopardized the end analyses results giving misleading information.

The purpose of a mold testing/inspection is to determine the presence of mold spores in an indoor environment. Our mold IAQ test will determine what kind of mold genus is present, the (raw count) amounts found in the air and if the number of spores found are normal for that environment or elevated. The number of IAQ samples are dependent on the size and configuration of the building and other living area under the HVAC system. The IAQ test will be performed in accordance to the strict guidelines and protocol established by IAC2, IAQA, EMSL, PRO-LAB and ESA organizations.

Our Final Mold Assessment report will be based on the EMLS Laboratory data results, the Science of the building/house, interview with the client and the Mold Inspection / Mold Screening as well as the age of the building. HIUSA/IMS will compiled & analyze the data obtained to arrive to a recommendation to address the issues inside the living space. HIUSA/ IMS uses IICRC S520 (Standard and Reference for Professional Mold Remediation), IICRC S500 (Standard and Reference Guide for Professional Water Damaged Restoration) and ASTM D-7338 (Standard Guide for Assessment of Fungal Growth in Buildings) for study references.

Mold Assessment Final Report:
Observation made during the day/time of the Mold screening
Certified Inspector visual observations
Humidity readings (applicable)
Temperature readings (applicable)
Moisture readings (applicable)
Infra-Red (FLIR - Thermal Imaging) Scanning

Digital pictures (red flag areas & sample test set-up)
Count of the number of spores in the airhe type of mold/spore’s present
Count of the number of spores in the air
Assess whether an unusual Mold condition exist
Description of the mold and any possible health effects
Conclusions and Recommendations

Any question regarding Mold Inspections, Mold Assessments and or PRVs or to schedule an appointment call 850-814-3889 or visit us at: www.INDOORMICROBIALSPECIALIST.com or www.HOMEINSPECTORUSA.biz

MOLD INSPECTIONS & MOLD TESTING. Two offices to serve you: The Villages & Gainesville, Florida. We service from Orange County to Alachua County Florida and everything in between. (The Villages, Leeesburg, Wildwood, Ocala, Gainesville, Newberry, Mount Dora, Clermont, Orlando, Eustis, Micanopy among other cities.

#moldinspectionsgainesville

#moldinspectionsthevillages

#moldtestingthevillages

#moldinspectionsleesburg

#moldinspectionsocala

#moldtestingocala

#moldinspectionsorlando

#moldinspectionsclermont

 

 

 

Posted by

close

This entry hasn't been re-blogged:

Re-Blogged By Re-Blogged At
Topic:
Local News and Events
Location:
Florida
Tags:
mold testing gainesville
mold inspections gainesville
mold inspections the villages
mold testing the villages
mold inspections lady lake
mold inspection leesburg
mold inspections ocala
mold testing ocala

Post a Comment
Spam prevention
Spam prevention
Show All Comments
Anonymous
KQfDCoUhOalFVXJ

vTpKfLjGzmx

Apr 02, 2020 11:11 PM #1
Anonymous
QXbSuIVZL

crTNSqCA

Apr 02, 2020 11:11 PM #2
Post a Comment
Spam prevention
Show All Comments

What's the reason you're reporting this blog entry?

Are you sure you want to report this blog entry as spam?

Rainmaker
505,141

John M. Acaron, CMI, MRSA

Master Mold Inspector & Chief Mold Assessor
Home Inspections & Mold Inspections
*
*
*
*
Spam prevention

Additional Information