MOLD INSPECTIONS and MOLD TESTING, INVERNESS, FL

By
Home Inspector with INDOOR MICROBIAL SPECIALIST HI-80 & MRSA1895

Don't Just Hire Anyone!! Ask for references and credentials. Do not make a mistake. Inverness, Florida.

Not all Mold Assessors have the same education, training, experience and expertise in indoor microbial / mold.

 

Our Mold Assessment and Indoor Evaluation will specifically address the environmental issues identified inside the living space related to moisture intrusion,  levels of airborne mold spores, musty odors and fungal growth. Our Chief State License Mold Assessor Mr. John M. Acaron is the principal and Operations Director of INDOOR MICROBIAL SPECIALIST responsible for conducting the Mold investigations. Mr. Acaron staff has degrees in Engineering, Chemistry with minors in Biology as well state licensed Mold Assessors and Home Inspectors with vast experiences in residential design and construction. Do you need a Mold Assessment in Inverness, Florida. Just visit us or give us a call for a consultation.

It all begins with an interview with our clients following with our facts finding approach conducting a Mold screening and inspection inside the property inside living space. Instruments such as Moisture meters, Moisture detectors, Infrared Cameras, High power lumens flashlights are normally use to for the investigation. A series of  samples may be conducted such as Indoor Air Quality sampling, Bi-O-Tape Lift sampling, SWAB sampling, Bulk sampling, Cavity sampling, Dust sampling and Laboratory testing. The number of IAQ samples are dependent on the size and configuration of the building and other living area under the HVAC system.   An average number of IAQ air samples ranges from 5 to 8 on an average home or office. It is important to have enough data point to be able to professionally ascertain what is going on inside the living space. Taken less than required number of samples can jeopardized the end analyses results giving misleading information. 

 

The purpose of a mold testing/inspection is to determine the presence of mold spores in an indoor environment. Our mold IAQ test will determine what kind of mold genus is present, the (raw count) amounts found in the air and if the number of spores found are normal for that environment or elevated. The number of IAQ samples are dependent on the size and configuration of the building and other living area under the HVAC system.   The IAQ test will be performed in accordance to the strict guidelines and protocol established by IAC2, IAQA, EMSL, PRO-LAB and ESA organizations.

 

Our Final Mold Assessment report will be based on the EMLS Laboratory data results, the Science of the building/house, interview with the client and the Mold Inspection / Mold Screening as well as the age of the building.  HIUSA/IMS will compiled & analyze the data obtained to arrive to a recommendation to address the issues inside the living space. HIUSA/ IMS uses IICRC S520 (Standard and Reference for Professional Mold Remediation), IICRC S500 (Standard and Reference Guide for Professional Water Damaged Restoration) and ASTM D-7338 (Standard Guide for Assessment of Fungal Growth in Buildings) for study references.

Any question regarding Mold Inspections, Mold Assessments and or PRVs or to schedule an appointment call 850-814-3889 or visit us at: www.INDOORMICROBIALSPECIALIST.com or HOMEINSPECTORUSA, LLC

 

MOLD INSPECTIONS & MOLD TESTING. Two offices to serve you: The Villages & Gainesville, Florida. We service from Orange County to Alachua County Florida and everything in between. (Inverness, Crystal River, The Villages, Leesburg, Wildwood, Ocala, Gainesville, Newberry, Micanopy, Mount Dora, Cristal River, Lady Lake, Clermont, Orlando, Eustis, Micanopy, Tavares among other cities).

#moldinspectionsinverness

#moldinspectionsthevillages

#moldtestingthevillages

#moldinspectionsleesburg

#moldinspectionsocala

#moldtestinginverness

#moldinspectionsinverness

#moldinspectionsclermont

Posted by

close

This entry hasn't been re-blogged:

Re-Blogged By Re-Blogged At
Topic:
Local News and Events
Location:
Florida Citrus County Inverness
Tags:
inverness mold inspector
mold inspector inverness
mold inspections inverness
mold testing inverness
inverness mold inspections
inverness mold inspection

Post a Comment
Spam prevention
Spam prevention
Show All Comments
Anonymous
yuGTZtVUFELHdJ

nACvqYjUWITkKg

May 15, 2020 07:10 PM #1
Anonymous
CdKkzMUlYcLAhb

mOdBhiMPJpAU

May 15, 2020 07:10 PM #2
Post a Comment
Spam prevention
Show All Comments

What's the reason you're reporting this blog entry?

Are you sure you want to report this blog entry as spam?

Rainmaker
504,941

John M. Acaron, CMI, MRSA

Master Mold Inspector & Chief Mold Assessor
Home Inspections & Mold Inspections
*
*
*
*
Spam prevention

Additional Information