What is the Best Way to Clear a Heavy Bush?

The best way to clear a bush is by cutting it apart using a pruning tool then digging out the roots. The empty ground can then be filled up with topsoil.

There are many reasons to clear out bushes, maybe you just want space in your backyard to grow a tree or a plant or you just need a clean neat backyard.

This can be done in very many ways. From simple ways like using a lawnmower to cut the tall grass to difficult and strenuous methods like cutting it apart manually.

How Do You Clear a Bush

• Scope out the place

In order to clear a bush, you first need to check out the land. See how far the bush is spread, how long it is, basically just scope out the place to have a game plan. Consider the various methods you could use to clear out the bush faster and efficiently without using much effort.

Take a note of the areas with thick vegetation or areas that may prove to be a challenge when you clear the bush later.

• Disposing of the waste

The next step is considering how you will dispose of the waste. When you clear a bush, there will be a lot of waste left behind. It might be too much for the weekly trash collection. You need to have other strategies such as recycling in mind.

These may also include renting a yard waste dumpster or even composting.

• Tools

After you have selected the appropriate method get your tools. When clearing out a bush you must have at least a few tools even if you’ll be clearing out the bush with your hands.

The following are some of the tools you might need when clearing a bush:

• An axe
• Chainsaw
• Weed hacker
• Stump grinder
• Bow saw
• Rake
• Machete
• Shovel
• Tree pruner

You might also need these materials for general safety and efficiency:

• Gloves
• Helmet
• Eye protection
• Trash bags (preferably heavy-duty)
• Shirts and pants that are long-sleeved

As a safety precaution, you should always ask someone to help you if you are unfamiliar with using the tools.

• Small trees

Now you are ready to clear out the bush, you should start with the small trees. Make a mark about a foot from the ground. When cutting down a tree begin by cutting at a 45-degree angle using a chainsaw. This should be done on the side you want the tree to fall.

Don’t stop until you are at least a third way through the tree’s trunk. Cut another 45-degree edge on the other side but this time make it slightly higher than the one on the opposite side. Keep cutting until you are halfway through the tree’s trunk.

The tree should now fall if you push it from the side you made you made the second cut. Do this for all the trees that are part of the bush.

• The stump

The next step is removing the stump. With the stump, there are various ways to remove it depending on its size. You could dig it out using a shovel. This works for small stumps with shallow roots.

Begin by digging around to expose the roots well, then get an axe and cut the stump. You pull it out from the ground.

For stumps that have stubborn roots, you could use a stump grinder. The stump grinder can also work with medium roots. You could find a place that rents one and hire it to get the job done much faster.

Remember to fill up the hole with soil after the stump is removed.

• Shrubs

The next step after trees and stumps have been removed is the shrubs. Get rid of the mid-sized shrubs. You could do this by hand but others may require using a shovel to get to the roots. Remember to prune back the smaller branches of the shrubs to make it easier for you when you dig it out.

• Undergrowth

After clearing out the shrub the only thing remaining now should be undergrowth. These may include weeds, vines, and tall grass. For this task, you might need a tree pruner, a weed hacker, or a machete. Cut the thick vines and toss them to the side.

You could pull out the weeds from their base with your hands. A lawnmowing service can be used for trimming the tall grass thin. Using a lawnmower, however, might slow you down as you will need to stop and clear out your deck from time to time.

Finally, you dispose of the waste. Rake it up into piles and decide what you want to do with it whether you want to compost it or get a yard waste dumper.

How Much Do Bush Clearing Cost?

If you would like to hire someone to help you with clearing your bush, you could hire a bush clearing service. The charges will range between $200 and $850 per acre.

This will also depend on the amount of overgrown vegetation and bushes on your land. Other factors also come into play when determining the cost of hiring bush clearing services.

Prices will be higher if you would like to clear hard plantations or forests, this is because they are strenuous and require heavy machinery. However, for properties that have only grass and a small undergrowth, the prices will be cheaper.

The company you hire will also influence the costs. Some companies have higher rates than others.

If you want to get cheaper prices, we recommend hiring a bush clearing service in the winter. During this time, it is easy to get discounts and low rates.

Other factors that may influence the price of bush clearing include the debris found on your land and the distance of the area you require the services from the town.

Should I Opt for a Garden Maintenance Company, a Tree service or Do it Myself?

The answer depends on the size of the land and the vegetation and bushes that require clearing. If the vegetation is thick and there are large trees, we recommend getting a tree service to do the job.

A maintenance company is perfect if the land is mostly made up of a few weeds and grass. This is a cheaper option compared to the tree service company. However, if you have the skills and the right tools for the job, you could do it yourself.

This is perfect if the land you are trying to clear isn’t that big plus you would have saved up to $200 per acre.

It’s safest to call a Garden Maintenance and tree removal company to get a free quote online through gotreequotes.com.au, rather than going into battle on the yellow pages.