Polycarbonate is the most durable and popular material that can be used for a roofing system. It has amazing characteristics and attributes which make it stand out from other types of material. However, you should be extra careful while working with a polycarbonate roofing system to make sure that everything is on point.
Here are six tips mentioned to help you while working with polycarbonate roofing.
You must choose the manufacturer of polycarbonate sheets carefully to make sure that you don’t regret your decision at the end of the day. Also, the instructions and guidelines of the manufacturer are significant which you cannot ignore. You must follow the instructions properly at every step from the cutting to the installation. However, if you show any negligence or carelessness in following the instructions, you won’t be able to claim the warranty you get with the product.
One side of the polycarbonate roofing sheets is specially designed to deal with the harmful radiations of the sun. When you decide to get the sheets installed on your roof, you must make sure that the UV protected side is facing the sun. Otherwise, the harmful radiation of the sun might enter your home to further damage your health. Moreover, you won’t be able to enjoy the sunlight without its disastrous consequences.
Polycarbonate sheets can expand and contract with the temperature changes throughout the day. You must keep some room for necessary thermal adjustments. You can simply keep the holes of sheets a little oversized to allow them to expand or contract whenever they have to. If you don’t act carefully while drilling the screw holes, the expansion or contraction might result in damaging the sheets.
Since every area has different weather requirements, you should consider the weather requirements of your area while installing polycarbonate roofing sheets. If you don’t install your sheets consciously, they might start wearing down due to heavy winds and storms. So, you must take the prevailing wind direction of your area into account to make sure that the sheets are being installed in the correct orientation. You can also get secondary glazing installed on your existing windows to reduce the external noise caused by winds.
The pitch of polycarbonate sheets is another important aspect to consider. You can take help from a contractor to keep the sheets at a certain degree that allows the rainwater, dust, debris, snow, and ice to run off towards the gutter system of your roof. It would further help prevent moisture issues, leakages, mold, rusting, and dirt build-ups on your roof.
When it comes to fulfill the cleaning requirements of polycarbonate sheets, it is suggested not to use harsh chemicals. Instead, you should use a piece of soft cloth or sponge, mild detergent, and warm soapy water to clean the surface. You should also rinse it well and make sure that you don’t scratch the sheet in the process.