Your Name:
Your Email Address:
To: (Email)
Subject:
Message:
Email Preview:

Your name saw this post on The ActiveRain Real Estate Network and thought it might be of interest to you. Please see the link below to review the post.

Condensation Inspection
Metals also vary in their thermal conductivity.  Thus, they tend to cause water vapor to condense.  Inspectors can be aided by a rule of thumb that states that a metal's ability to transfer heat (and, therefore, create condensation) is roughly equal to that metal's electrical conductivity. Electricians and some inspectors may know that, of all metals, copper is the second-best conductor of heat and electricity, meaning that it's more likely to respond to a brief burst of cool water or air than other metals, such as steel or lead. The metal with the greatest conductivity is silver, but it's far too expensive to be used in ordinary construction.  Condensation is more of a problem in older homes, which often lack a vapor barrier or sealers in the concrete. In this instance, moisture in the ground is forced through the foundation and masonry, which is why condensation is commonly found in the basements of older buildings.  The two strategies used to reduce condensation are to lower the relative humidity of the air and to keep surfaces from becoming cold. These strategies can be practiced in the following ways:
Use a dehumidifier. This is a simple, effective appliance used to lower the humidity of the ... more

__________________________________________________
Are you on The Rain? Grow Your Network!




Spam prevention