Protect Yourself with a New Construction Inspection

Builders of new homes offer or are required to warrant their work for a specified period.  Municipal inspections are generally required during different stages to "ensure the life, health, safety, and welfare of the public" but even if something is missed, the ultimate responsibility for building to code belongs to the builder, even if the municipal inspector misses something.

There are four basic stages of residential construction including:

1. The foundation stage begins with excavation, footings, foundation walls or slab, waterproofing, backfill, compaction and underground rough plumbing and electricity.  Municipal inspections are done prior to pouring the foundation while items are visible.
2. The framing stage includes the wood or steel framing, exterior walls and roof sheathing, exterior trim and siding, windows, doors, and roofing.  Depending on the municipality, there could be inspections of the rough framing separate from the roofing. 
   Next in this stage comes rough plumbing including water, waste, and vent piping, rough electrical, rough mechanical, ductwork, wiring, and electrical panel installation.  Municipalities will usually inspect plumbing and electrical separately.
3. The wall insulation and drywall installation are done and inspected depending on the municipality before tape and texturing are done. 
4. The final stage of construction includes flooring, cabinets, millwork, countertops, tile, mirrors, electrical trim, plumbing trim, and mechanical.  Some builders will not install appliances and HVAC until the last stage to protect against theft.  Municipal inspections are made in the final electric, plumbing, and mechanical.

A "Final Inspection" is done after all the periodic inspections have been completed and passed.

Defects that manifest themselves during the warranty period are the responsibility of the builder.  Unfortunately, some things may go undetected until after the warranty expires leaving the repair expense as the sole burden of the buyer/owner.

A safeguard that the purchaser will not be out of pocket for repair expenses is a home warranty which shifts the liability to the warranty or service contract company.  This is a negotiable item that can be paid for by the builder or the buyer.  However, this warranty will have a time limit on it and to continue the coverage, the buyer/owner will have to renew it by paying the additional annual premium.

One more safeguard for the purchaser is to hire their own inspector, to conduct periodic inspections during the different phases of construction.  Unlike an inspection made on an existing home, the inspector will have to visit the site multiple times during the process.  For that reason, constructions inspections are more expensive.

When hiring an inspector for new construction, ask at what stages do they inspect.  A typical new construction inspection might be at the end of the foundation stage, another at the end of the framing and rough plumbing, electrical, and mechanical, and the final inspection after the home is completed.

A provision allowing a buyer to hire their own inspector for periodic inspections should be included in the sales contract.  Your agent can not only help you get that included but assist in negotiation of any issues that arise because of the periodic inspections.