mold los angeles: Dealing with mold
- 09/04/07 05:04 PM
Hire a professional to clean mold damage Sanitation Cleaning and disinfecting surfaces with nonpolluting cleaners and antimicrobial solutions will remove mold and protect against mold growth. Ventilation Although proper ventilation is important, minimize air circulation and don't use your ventilation systems if mold is detected in the filters or ducts. Using these systems will disperse the spores and create new mold growth. In addition, mold spores might be inhaled and cause respiratory irritations. Protective Gear Mold is a contaminant, presenting health hazards. Protect yourself during clean up using protective gear such as: Disposable plastic gloves. Respirator with a particulate filter, N-95 respirator, or half-face respirator with a HEPA … (2 comments)
mold los angeles: Prevent Water Damage in the Kitchen - part 2
- 07/19/07 04:56 PM
After following the basic steps in part 1 of this article and learning how to prevent water damage in the kitchen's sink, countertops, and dishwasher, read this part to learn how to inspect and maintain the other high-risk areas of your kitchen. Refrigerator Being hard to reach, the area behind the refrigerator is hardly ever inspected. A periodic inspection will significantly reduce the chance for water related problems. Moisture behind the refrigerator is a major warning. Do not ignore any sign of moisture or leaks, and fix them immediately or hire an appliance repair technician. If mold is spreading underneath the refrigerator, clean it … (2 comments)
mold los angeles: Invisible Causes of Water Damage
- 07/16/07 09:55 AM
Heating & Air Conditioning Systems Failure to clean and service air conditioners can lead to poor performance, higher operating costs and moisture problems. Moist and dusty cooling ducts promote mold and other water-borne biological growth. Plumbing Plumbing fixtures usually develop leaks due to pipe joint, or hose attachment failures. Internal wall leaks are hard to detect and often result in significant damage. Basements A damp basement is frequently caused by accumulations of moisture dripping through concrete foundations. The moisture evaporates, increasing indoor humidity even if there are no visible leaks or standing water. Another common cause is condensation on the cold concrete walls and floors during more … (0 comments)
mold los angeles: Visible Causes of Water Damage to a home or business
- 07/16/07 09:49 AM
Visible Causes of Water Damage Roof Leaks Roofing materials wear out and expose the roof decking to moisture intrusion and damage, especially around roof penetrations like chimneys, plumbing vents, and exhaust fans. Worn out shingles tend to curl and crack, allowing moisture intrusion. Cracked chimney caps allow water into interior areas of the chimney. Rain water accumulates between the roof and a blocked gutter. Flat roof drains can clog and hold water on the roof, increasing the risks of a leak and a possible collapse of the entire roof under the weight of the water. Attics Poor attic insulation and ventilation allows heat to escape, turning … (0 comments)
mold los angeles: 10 things to know about MOLD
- 06/15/07 10:58 AM
10 Things you should know about MOLD Potential health effects and symptoms associated with mold exposures include allergic reaction, asthma and other respiratory complaints There is no practical method to eliminate all molds and mold spores in the indoor environment. Mold is controlled by controlling moisture. If mold is a problem in your home or business, eliminate the sources of moisture and get the mold cleaned up. Fix the source of the water problem or leak in order to prevent mold. Reduce indoor humidity ( to 30 - 60%) in order to help decrease mold growth by : venting bathrooms , dryers … (0 comments)
Hire a professional to clean mold damage;)
;)
